Konica Minolta DiMAGE Z1 - Manual (Page 60)

60 A
DVANCED RECORDING
Full-time AF
With full-time AF active, the autofocus systems continually focuses to keep the monitor image sharp.
This also reduces the autofocusing time when taking pictures. When the camera is set to manual
focus, full-time AF is disabled. Turning the full-time AF function off can help conserve battery power.
Full-time AF can be turned on and off in section 2 of the P, A, S, and M menus (p. 44).
Flash mode
The flash modes can be changed in section 2 of the P, A, S, and M
menus (p. 44). This menu option is used when another function is
assigned to the flash mode button, see page 65 on the custom key
function. For more on flash modes, refer to page 26.
Focus mode
Full-time AF
Flash mode
Metering mode
Autofocus
On
Autoflash
0
MultiSegment
Flash comp.
Flash compensation
Flash compensation increases or decreases the flash exposure of
the built-in flash in reference to the ambient exposure by as much
as 2 Ev.
Select the flash compensation option section 2 of the P, A, S, and
M menus (p. 44). Use the up/down keys to adjust the degree of
compensation (1). Press the central controller button to set this
value (2). If any value other than 0.0 is set, an indicator will be dis-
played on the monitor as a warning.
No compensation Negative compensation Positive compensation No flash
–2 ~ +2
Focus mode
Full-time AF
Metering mode
+0.3
Flash mode
Flash comp.