Konica Minolta DiMAGE Z1 - Manual (Page 13)

13
Inserting batteries
Insert the batteries as indicated on the diagram on the inside of the bat-
tery-chamber door. Confirm the positive and negative battery terminals are
oriented correctly.
To open the battery-chamber door, slide the lock to the open position (1).
Slide the door the the side of the camera (2) to release the safety catch.
Lift the door to open (3).
This digital camera uses four AA-size alkaline or Ni-MH batteries. Do not use other types of AA bat-
teries. The camera should be off when replacing batteries.
Close the battery-chamber door and slide it toward the body (4) to engage
the safety catch. Slide the battery-chamber lock to the close position (5).
After installing the batteries, the set-time/date message may appear on the
monitor. The clock and calendar are set in section 3 of the setup menu (p.
18).
1
2
3
4
5