Kenwood CT-405 - Manual (Page 7)

7
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.
Automatic Operation
Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.
Synchronized Recording
Lets you synchronize recording with the start of playback when recording from CD.
SYSTEM CONTROL CONNECTIONS
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
This unit is compatible only with the [SL16] mode. The system con-
trol operation is not available if the unit is connected in the [XS-8]
connection mode.
÷ Do this operation after completing all connections.
(Ensure that the unit is set to POWER OFF.)
1. If your amplifier or receiver does not have a system control terminal,
do not connect any system control cords to the system control termi-
nals on the other components.
2. Do not connect system control cords to any components other than
those specified by Kenwood. It may cause a malfunction and damage
your equipment.
3. Be sure the system control plugs are inserted all the way in to the
system control terminals.
Notes Notes
System connections
TAPE B
2 3 7
0
2 3 7
0
CCRS
SYSTEM
CONTROL
SYSTEM
CONTROL
SYSTEM
CONTROL
SYSTEM
CONTROL
SYSTEM
CONTROL