Kenwood CT-405 - Manual (Page 27)

27
Track System ................. 4 track, 2 channel stereo
Recording System .......... AC bias (Frequency: 105 kHz)
Heads ............................... A DECK
Playback head ................... 1
B DECK
Playback/recording heads 1
Erasing head ..................... 1
Motors .............................. A DECK ............. DC motor
×
1
B DECK ............. DC motor
×
1
Wow and Flutter ............. ±0.17 % (IEC)
±0.28 % (DIN)
0.1 % (W.R.M.S)
Fast Winding Time ......... Approx. 110 seconds (C-60 tape)
Frequency Response
TYPE tape .................... 30 Hz to 18,000 Hz, ±3 dB
TYPE tape .................. 30 Hz to 19,000 Hz, ±3 dB
Signal to Noise Ratio
Dolby NR OFF ................ 56 dB
(IEC, 250 nWb/m, TYPE tape)
Dolby NR OFF ................ 59 dB
Dolby B NR ON .............. 68 dB
Dolby C NR ON .............. 75 dB
(3rd, H.D., 3 %, TYPE tape)
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Specifications
Harmonic Distortion ....... Less than 1.2 %
(at 315 Hz, 3rd H.D., 250 nWb/m, TYPE tape)
Input sensitivity/Impedance
LINE IN ........................... 122.8 mV/47 k
Ω
Output Level/Impedance
LINE OUT ....................... 775 mV/1.0 k
Ω
Headphones ................... 0.5 mW/32
Ω
[General]
Power Consumption ...... 20 W
Dimensions ...................... W:
440 mm (15-3/4”)
H: 132 mm (5-3/16”)
D: 380 mm (14-15/16”)
Weight (Net) .................... 5.3 kg (11.7 lb)
Notes Notes