Kyocera Neo E1100 - Manual (Page 11)

User Guide 11
Attach the Lanyard
To attach the lanyard:
1. Hold the phone face down.
2. Find the notch directly above the back
cover. It is square. Use the notch to slide
the cover down. Lift the cover from the
bottom to remove.
3. Remove the battery.
Use the notch
directly below the
battery casing. It is a
half circle.
4. Thread the lanyard
through the upper
square notch’s hole.
5. Make sure the lanyard
catches on the hook
inside the hole.
6. Insert the battery.
7. Replace the battery door cover and snap
it into place.