Kodak Printe - Manual (Page 41)

Menu Tree B-9
VInylJet 36 TM Reference Manual
Prime menu
Prime All Prints the prime pattern for each cartridge.
Prime Single Provides access to a further menu in which you can choose to prime
an individual cartridge.
Start Routine Prints a recovery pattern/jet status plot.
Clean (Color) Causes the selected cartridge to clear its jets by expelling a small
amount of ink into the service station.
Clean All Clears the jets for all the cartridges. Select this function whenever the
printer has been idle for four hours or more.
Color Calibration Menu
(Color) Vertical lets you enter the number which corresponds to the best vertical
alignment in the test pattern for the C, M, and Y cartridges.
(Color) Horizontal lets you enter the number which corresponds to the best horizontal
alignment in the test pattern for C, M, and Y cartridges.
Calib Print Test prints the current heads, current horizontal head to head, and other
calibration patterns described in the Quick Start Guide.
Calibration Menu (Bold indicates the default)
Use Calib XY provides access to a further menu in which you can set this function
On (default) or Off.
Paper Axis Test prints the paper axis test pattern.
Color Db Menu provides access to a further set of menus in which you can print the
color deadband test pattern and set deadband velocity compensation
for each cartridge.
Open Jet Menu provides access to a further set of menus in which you can print the jet
status pattern and set the compensation for jets in each cartridge.
Paper Axis provides access to a further menu in which to enter values determined
by examining the paper axis test pattern.