Kodak Printe - Manual (Page 17)

Printer Options 2-5
VinylJet 36 TM Reference Guide
Save media
When the Save Media is On (the default), the media advances only as far as needed to
print the image. With the Save Media option turned off, the printer advances the length of
a standard sheet, for example, 24x36 or 36x48 inches.
➪
To turn off Save Media
1 Press Setup/Paper Option/Save Media.
2 Choose Off.
3 Press OK.
Auto-Wipe
The cartridge jet plates are periodically wiped during printing. The default for this func-
tion is ON. If you are having problems with banding, you can sometimes solve the
problem by setting the wiper to OFF; however, this can cause clogging of the inkjets.
➪
To turn off the wiper
1 Press Setup/Paper Option/Auto-Wipe .
2 Choose Off.
3 Press OK.
Defining user setup
You can save the options you use most frequently so you don’t have to reconfigure the
printer each time you print an image. You can define up to eight different combinations of
options and save them with a user number ranging from 1-8. Select the user number you
want to use before sending an image to the printer.
Note: If your printer driver has host-controlled settings, the user setup may be overrid-
den. If possible, disable the driver control settings.
You can save settings for the following options:
• Auto-Wipe On or Off • Quality Mode
• Color Mode • Save Media On or Off