Kenwood KVT-915DVD - Manual (Page 47)

Position Fine Control
You can fine-adjust your listening position.
Position Fine Control screen
1 Adjusts the volume.
2 Selects a speaker to be adjusted.
3 Indication of setup distance.
The adjusted distance (Position and Position Fine
Control values), and the total of the distance
adjusted by Car Type Set Up (see page 60) and
the adjustment distance for position setup are
indicated.
4 Adjust the distance to each speaker.
5 Stores the present adjustment setup in memory,
or calls it from memory.
6 Exits the Position Fine Control setup and returns
to the Position screen.
1 Center speaker
2 Left front speaker
3 Right front speaker
4 Left rear speaker
5 Right rear speaker
6 Subwoofer
Select a speaker you wish to adjust 2
Adjust
Display the Position Fine Control screen 1
To store your adjustment in memory:
—
Continue to touch to more than 2
seconds.
To call your adjustment from memory:
—
Touch to of your adjustment you
wish to call from memory.
• You can also call your adjustment setup in
memory using to buttons on
the Position screen (see page 92).
• Only the adjusted distance of position setup
(Position and Position Fine Control values) is
stored in memory. Therefore, the final
adjustment distance changes if you change the
Car Type Set Up value (see page 60).
Return
Close the Position Fine Control Screen 4
P3 P1
P3 P1
P3 P1
P3 P1
P3 P1
Store or call your adjustment into/from
memory
Set a delay time 3
Sound Effects Menu
Displaying the Position screen
Position screen
Position
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (see page 59)
4 Calls the Sound Effects Menu.
5 Sets a listening position.
You can select any of "FRONT R" (Right front),
"FRONT L" (Left front), "FRONT ALL" (All front), and
"ALL" (All) positions.
6 Displays the Position Fine Control screen.
(see page 89)
7 Call your setup you have stored in memory from the
Position Fine Control screen.
• The final distance is adjusted to the total of Car
Type Set Up value (see page 60) and Position
Setup (both Position and Position Fine Control)
value.
• If you change the Car Type Set Up value (see
page 60), the position is set to "ALL".
FRONT R
just
P1 P2 P3
1
1
1
1
4
5
6
3
2
7
Return
0.33 feet
0.33 feet
P1 P2 P3
1
1
1
1
3
2
4 4
5
6
1
3 2
4 5
6
English
92 English English 93
Position
You can adjust the sound effects according to your listening position.