Kenwood KVT-915DVD - Manual (Page 13)

TV Control
Seek Mode
Sets a TV station selection.
If is not shown, touch .
The mode is switched each time you touch the
button.
Tunes in a station with good
reception automatically.
Tune in stations in memory one
after another.
Switches to the next channel
manually.
Auto Memory
Stores stations with good reception in memory
automatically.
If is not shown, touch .
Touch or .
Auto Memory terminates when 6 stations are stored
or when all stations are tuned in.
The operation ends automatically if you do not
operate within 10 seconds.
Start Auto Memory 3
Next AME
AME
Select the Auto Memory mode 2
TV
Select a band you wish to store in memory 1
Next SEEK
SEEK
Manual Memory
Stores the current receiving channel in
memory.
—
If to are not shown, touch .
Continue to touch until the memory number appears.
Preset Select
Lists and tunes in stations in memory one after
the other.
(P 23 y)
1 Tunes in the displayed station.
If the station name is displayed if it has been set.
2 Switches the band of the displayed station list.
3 Band Display.
4 Returns to the TV Menu.
Preset Select
Call the Preset Select Menu 2
MENU
Call the TV Menu 1
Next 6 1
6 1
Store in memory 2
TV
Select a channel you wish to store in memory 1
Set Station Name
Names a station.
For character entry details, see
(see page 56).
• You can store up to 20 stations in memory.
• You can set a station name only after you have
applied the parking brake.
OK
Exit the Set Name mode 5
Enter a name 4
Name Set
Selects the Set Name mode 3
MENU
Call the TV Menu 2
TV
Select a station you wish to name 1
Direct Search
Tunes in a station when its channel number is
entered.
—
When you enter a channel number, signal reception
starts.
Example: When you receive Channel 06
Direct Search ends automatically if you do not
operate within 10 seconds.
Enter a channel number 2
DIRECT
Selects the Direct Search mode 1
AUTO 1
AUTO 2
MANUAL
TV TV
69ch P6
1 Preset 6 12 ch ch TV 6 1 9
TV1
2
2
3
4 1
English
English 25 24 English