Kenwood KVT-915DVD - Manual (Page 40)

If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
—
You must enter the same security code as that you
have entered in Step 3 above.
Now, you can use your Receiver.
Enter
Enter the security code 2
9 0
Enter the correct security code 1
Setup Menu
Security Code Setup
You can set a security code to protect your
receiver system against theft.
When the Security Code function is activated, the
code can't be changed and the function can't be
released.
Note, the Security Code can be set as the 4 digit
number of your choice.
If is not shown, touch
or to display it.
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 86)
4 Calls the Setup Menu.
5 Allows you to start security code registration.
If you have already completed the code
registration, the
is not displayed. Set
Next
Prev. Security
Security
Display the Security Code Setup screen 1
1 Enters a security code.
2 Clears your entry.
3 Cancels the registration and returns to the
Security Code Setup screen.
4 Enters the security code.
—
Input a four-digit number.
Reenter the same security code as that you have
entered in Step 3 for confirmation.
If you enter a different security code, the screen
returns to Step 3 (for the first code entry).
Your security code has been registered.
If you press the Reset button or if you disconnect
your Receiver from the battery after the code
registration, you need to enter the registered
security code.
See below for details.
Enter
Register the security code again 6
Reenter the security code 5
Enter
Register your security code 4
9 0
Enter a security code 3
Set
Start the security code registration 2
Set 2
1
1
1
1
3
4
5
Enter
Cancel
PassWord
6 5 4
9 8 7
0
3 2 1
＊＊＊＊ 1st
Clear
2
1
3
4
English
78 English English 79