Kenwood KDC-MPV7023 User Manual
Page 9
switch as shown below.
4
Adjust the Audio item
Press the [
4] or [¢] button.
Adjustment Item
Display
Range
Bass level
"Bass"/ "BAS"
–8 — +8
Middle level
"Middle"/ "MID"
–8 — +8
Treble level
"Treble"/ "TRE"
–8 — +8
Balance
"Balance"/ "BAL"
Left 15 — Right 15
Fader
"Fader"/ "FAD"
Rear 15 — Front 15
Non-Fading level*
"NF Level"
–15 — +15
Front/Rear High Pass
"HPF"
Through/100/125/170
Filter*
Hz
Non-Fading
"LPF NF"
50/80/120/Through Hz
Low Pass Filter*
Volume offset
"V-Offset"/ "V-OFF" –8 — ±0
Loudness
"LOUD"
ON/OFF
• Volume offset: Each source's volume can be set as a difference
from the basic volume.
• Loudness: Compensating for low and high tones during low
volume.
• * Function of the KDC-MPV7023/6023
5
Exit Audio Control mode
Press the [AUD] button.
1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
Audio Control
You can recall the best sound setting preset for different types of
music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [System Q] button.
Each time the button is pressed the sound setting switches.
Sound setting
Display
Flat
"Flat"/ "FLAT"
User memory
"User"/ "USER"
Rock
"Rock"/ "ROCK"
Pops
"Pops"/ "POPS"
Easy
"Easy"/ "EASY"
Top 40
"Top40"/ "TOP40"
Jazz
"Jazz"/ "JAZZ"
• User memory: The values set on the
10).
First, select the speaker type with the Speaker setting.
System Q
— 9 —
KDC-MPV7023_U.S r2 02.10.31 10:16 AM Page 9