Kenwood KDC-MPV7023 - Manual (Page 26)

Function of the KDC-MPV7023
You can set the display to a desired color.
1 Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the
"COL" display.
2 The color continues to change gradually
Hold down on the [
4] or [¢] button.
Release your finger at the color you want.
Colors adjusted using either [ 4] or [¢] will be stored
automatically, and they can be called by pressing [5] button.
Illumination Color Setting
Setting the Display type.
Display Setting
"Display C"/ "DISP C" Demonstration.
"Display A"/ "DISP A" Normal display type.
"Display B"/ "DISP B" Silent display type.
Switching Display Type
Function of the KDC-MPV7023/KDC-6023/KDC-5023R
Selecting the button illumination color as green or red.
Display Setting
"Button Green"/ "KEY GRN" The illumination color is green.
"Button Red"/ "KEY RED" The illumination color is red.
Selectable Illumination
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
DSI (Disabled System Indicator)
Function of the KDC-5023R
Synchronizing the RDS station time data and this unit's clock.
Display Setting
"SYNC ON" Synchronizes the time.
"SYNC OFF" Adjust the time manually.
It takes 3 to 4 minutes to synchronize the clock.
Synchronize Clock
Menu system
— 26 —
English
Display Setting
"DSI ON" LED flashes.
"DSI OFF" LED OFF.
KDC-5023R:
This adjustment can be done when the (page
26) is set as OFF.
1 Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust"/ "CLK ADJ" display.
2 Enter Clock Adjust mode
Press the [
4] or [¢] button for at least 1 second.
The clock display blinks.
3 Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [
4] or [¢] button.
4 Exit Clock adjustment mode
Press the [MENU] button.
Manual Clock Adjustment
KDC-MPV7023_U.S r2 02.10.31 10:16 AM Page 26