Kenwood KDC-MPV7023 - Manual (Page 28)

Function of the KDC-5023R
Sets the tuning mode.
Tuning mode Display Operation
Auto seek "AUTO 1" Automatic search for a station.
Preset station seek "AUTO 2" Search in order of the stations
in the Preset memory.
Manual "MANUAL" Normal manual tuning control.
Tuning Mode
Function of the KDC-5023R
Only stations whose reception is good are searched for in auto
seek tuning.
Display Setting
"LO.S OFF" The local seek function is OFF.
"LO.S ON" The local seek function is ON.
Local Seek
for news bulletin or belongs to -
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
Function of the KDC-5023R
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M"
"NEWS 90M"
When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
• If you choose the "20M" setting, further news bulletins will not be
received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for
(page 17).
• This function is only available if the desired station sends PTY-code
…
News Bulletin with Timeout Setting
Function of the KDC-MPV7023/KDC-6023
Setting the Front channel and Rear channel sound in the Dual
Zone System.
Display Setting
"Zone 2 Rear" The front is this unit's internal source, and the
rear is selected source sound.
"Zone 2 Front" The rear is this unit's internal source, and the
front is selected source sound.
Dual Zone System Setting
Menu system
— 28 —
English
KDC-MPV7023_U.S r2 02.10.31 10:16 AM Page 28