Operating instructions icc 1 s b/d english, Risk of overturning on too high gradients, Risk of overturning when taking bends rapidly – Karcher 1.142-114 User Manual
Page 5: For our environment, Intended use, Function description - sweeping machine, Before first operating unloading instructions
Operating instructions
ICC 1 S B/D
English
28
Risk of overturning on too
high gradients!
Danger!
The machine could topple over
when driving and turning on slopes.
—
Drive only on slopes up to 20 %
in the travelling direction.
—
At right angles to direction of
travel only negotiate gradients up
to a maximum of 10 %.
Risk of overturning when
taking bends rapidly!
Danger!
The machine can topple-over when
driving fast around curves.
Drive slowly in curves.
Danger of tipping over
given an unstable travelling
surface!
Danger!
The machine can tip over given an
unstable travelling surface.
Move the machine exclusively on
a solid travelling surface.
Danger of tipping over
given a sideways incline
that is too large!
Danger!
The machine can tip over given an
incline of more than 10 %.
For our environment
Caution, danger to the
environment from used batteries!
Do not dispose of exhausted
batteries as ordinary household
garbage.
Ensure environmentally
compatible disposal.
Caution, engine and hydraulic
oils endanger the environment!
Take spent oil after an oil change
to an oil collecting point or a
waste disposal company.
Intended use
—
This sweeping machine is
designed for sweeping surfaces
in outdoor areas.
—
It must not be used in enclosed
spaces.
—
No explosive substances or
substances which are a danger
to health may be swept up.
—
It is utilizeable on public
highways only after a previous
individual acceptance by an
authorized supervisory agency.
Function description -
sweeping machine
—
The dust generated is bound by
sprayed water (1).
—
The two side brushes (2) convey
the dirt in front of the suction
orifice (3).
—
The extractor fan (4) sucks up
the refuse, chops it finely and
conveys it to the refuse
container (5).
Before first operating
Unloading instructions
For safe transportation the machine
was secured with taut belts, ropes
or chains.
Proceed as follows when
unloading:
—
Apply parking brake
—
Remove the taut belts, ropes or
chains from the transporting
loops
Operating sweeping
machine without
automotive power
Unscrew rear cover
Shift overrunning lever (coasting
operation)
Note:
When the sweeper is not self-
powered do not move it over longer
distances and not faster than
10 km/h .
Operating sweeping
machine with automotive
power (as supplied)
Shift overrunning lever (driving
mode)