Konica Minolta DiMAGE S404 - Manual (Page 24)

24
FOCUS LOCK
The focus-lock function is used when the subject is off-center and outside the focus frame. Focus
lock may also be used when a special focusing situation prevents the camera from focusing on the
subject. This function is controlled with the shutter-release button.
Place the subject within the focus frame. Press and hold the
shutter-release button partway down.
• The focus signals will indicate that the focus is locked. The
shutter speed and aperture value will change from white to
black indicating the exposure is locked.
• When the focus is set, an AF sensor will briefly appear on the
live image to indicate the point of focus.
Without lifting your finger from the shutter-release button,
recompose the subject within the image area. Press the
shutter-release button all the way down to take the picture.
AUTO-RECORDING MODE
FOCUS RANGE
Wide-angle lens position
Telephoto lens position
Macro mode (p. 28)
0.5m -
∞ (1.6ft - ∞)
0.9m -
∞ (3ft - ∞)
0.16m - 0.6m (0.5ft - 2ft)
All distances are measured from the CCD
CCD plane