Konica Minolta Magicolor 3300 - Manual (Page 25)

EN-25
Zoom Playback
While reviewing your images, you may enlarge a selected portion of an image. This magnification
allows you to view fine details. Video clips cannot be displayed using the zoom playback feature.
1. Set the mode dial to the mode.
The last image frame appears on the LCD monitor.
2. Use the or button to select the frame you want to enlarge.
3. Adjust the zoom ratio by using the
or button.
Pressing the button will enlarge the image.
To return to normal magnification, press the button.
The image is displayed enlarged, you will see a red frame
with a red box inside.The red frame indicates the entire image,
while the red box shows the location of the currently enlarged area.
4. Use the , , or button to select the area to enlarge.
5. To return to the regular display from 4X-enlarged status, press the
button twice.
Note:
Pressing the button magnifies the image from 1X >2X >4X.
Pressing the button reduces the image from 4X >2X >1X.
Slideshow Display
The slideshow function enables you to playback your images automatically in sequential order as
a slide show. This is a very useful and entertaining feature for reviewing recorded images and for
presentation.
1. Set the mode dial to the mode.
2. Press the
button.
3. Select SLIDE SHOW by using the or button,
and press the button.
4. Set the playback interval by using the or button and
then press the button. The slideshow starts displaying
your images on the LCD monitor, one by one, with the
interval that you set.To stop the slideshow display, press the or button. To pause the
slideshow display, press the button. To resume from pause state, press the
button.
Note:
You can adjust the slideshow display interval within the range of 3 sec. to 9 sec. For slideshow
interval, refer to SLIDE SHOW in the Playback menu.