Konica Minolta Magicolor 3300 - Manual (Page 13)

EN-13
Getting Started
You can use either 2 AA size batteries (Alkaline, Ni-MH) or an AC power adapter (optional accessory)
to power the camera. Battery power is convenient for capturing images or video clips while an AC
adapter power is useful when transferring images to your computer.
Installing Batteries
1. Make sure the camera is turned off.
2. Slide the battery cover in the direction of
the [OPEN] arrow.
3. Insert the batteries, noting correct polarity (+ and -).
4. Close the battery cover firmly.
Note:
A CR-V3 Lithium battery pack can also be used as the power supply.
If you will not be using the batteries for an extended period of time, remove them from the
camera to prevent leakage or corrosion.
Never use manganese batteries.
Never use batteries of different type (together) or mix old and new batteries.
Avoid using batteries in extremely cold environments as low temperatures can shorten the
battery life and reduce camera performance.