Kenwood DDX5032M - Manual (Page 71)

English 71
If you have pressed the Reset button or if
you have disconnected the Receiver from
battery...
1 Enter the correct security code
You must enter the same security code as that
you have entered in Step 3.
2 Enter the security code
Now, you can use your Receiver.
⁄
• If you enter an incorrect security code, you cannot use
your Receiver for a while.
Incorrect entry count Receiver inoperable time
1 -
2 5 minutes
3 1 hour
4 or more 24 hours
iPod Setup
Performs setup when using iPod.
1 Display the iPod SETUP screen
Touch in the "Setup
Menu" screen (page 56).
2 Setup each item
1
2
3
1 Sets the Audio book playback speed.
2 Sets Wide Screen on or off.
3 Switches the video output signal. Select
from "NTSC" or "PAL".
⁄
• "Wide Screen" cannot be set while the iPod is connected.