Basic operations, Ce b d a – Kenwood DDX5032M User Manual
Page 10
C
E
B
D
A
10 DDX5032/DDX5032M
Basic Operations
Adjusts the volume
Turn it either way to adjust the volume.
E
Attenuates the volume
Press it to attenuate the volume.
Press it again to cancel muting.
E
Turns power ON/OFF
Press the button to turn on the power.
When the button is pressed and held down for
1 second or more, the power is turned off.
C
Switches to the Navigation system
Press the button to switch the display to the
navigation system screen.
B
Playing a USB device
When connecting a USB device, playback starts automatically.
Removing the USB device
Press
on the USB control screen to enter the USB suspend mode, and then remove the USB
device. See
¤
• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.
⁄
• If the USB source is selected when a USB device is not connected, "No Device"
is displayed.
• When the playback is stopped and then restarted, the playback will start from
the point where it was stopped at the last time. Even if the USB is removed
and connected again, the playback will start from the last stopped point
unless the contents in the USB device is changed.
• Make sure that the USB device is connected firmly.
SI indicator