Kenwood DDX5032M User Manual
Page 61
English 61
6
7
8
9
6 Returns to the "System Setup 1" screen.
7 Moves to the "System Setup 3" screen.
8 Sets the button illumination color.
See
9 When set to "ON", the illumination color of
the screen and buttons changes one after
another.
10
12
11
13
14
p Returns to the "System Setup 2" screen.
q Moves to the "System Setup 4" screen.
w Sets the Preout output. (Settable only when
in Standby mode)
"Rear" : Rear sound is output.
"Subwoofer" : Subwoofer sound is output.
e Sets the function of the [NAV] button.
"V. OFF" : Press the [NAV] button for more
than 1 second to turn the display
off.
"R-CAM" : Press the [NAV] button for more
than 1 second to switch to rear
view.
r Set to "OFF" if you want to retract the car
antenna when you are not listening to the
tuner source. (Function of Type M/Type M2)
(Settable only when in Standby mode)
15
16
17
t Returns to the "System Setup 3" screen.
y Selects a picture display time. (
"Middle")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
u Switches the background video output
signal. Select from "NTSC" or "PAL".
Panel Color Coordinate
Sets the screen and button illumination color.
1
Display the Panel Color Coordinate screen
See
2
Select a color
1
2
3
1 Sets to the touched color.
2 Sets and registers favorite color.
3 Returns to the "System Setup 2" screen.
To register your original color
1
Start the RGB coordinate
Next page
3