Dhcp “on” dhcp “off, System setup – Kathrein UFS 822sw User Manual
Page 49
49
Use the
buttons to select the “Get IP
Address” fi
eld and confi
rm by pressing the
button. Your DHCP server now indicates
the IP address to the receiver. As soon as the
receiver has been assigned its IP address by
the DHCP server (IP address is displayed),
press the
buttons to switch to the
“Save” fi eld and press the
button to confi rm.
Perform the settings for your network as
required. Use the
buttons to select the
lines to be changed; make the changes using
the numeric keypad. When you have completed
all the settings, press the
buttons to
switch back to the “Save” fi
eld and press
the
button to confi rm.
Confi guration example:
Receiver:
IP Address:
192.168.0.11
Subnet Mask:
255.255.255.0
PC/Laptop:
IP Address:
192.168.0.10
Subnet Mask:
255.255.255.0
SYSTEM SETUP
DHCP “On”
DHCP “Off”
Note:
Refer to our network function connection examples at the end of this manual and the instruc-
tions on this subject available on the Internet under “www.kathrein.de” “Service”
→ “Software
and Downloading”
→ “Receiver” → “UFS 822”.
If with the “DHCP On” setting
no connection can be establis-
hed between the receiver and
DHCP server/router, switch the
setting to “DHCP Off” and per-
form the setting as described
for (DHCP “Off”).