Kathrein UFS 822sw - Manual (Page 140)

140
UAS 481
Single-cable feed system
ERA 14 ERA 14
Note:
A maximum of two UFS 822s can be operated on
this system.
Connect the tuner input “1” to the socket and loop
the signal to the tuner input “2” (connect LNB 1
“Loop-through output” to LNB 2 input). Using this
type of connection with the “Single cable” system,
in contract to the normal DiSEqC™ system, allows
you to exploit the complete twin capabilities of your
UFS 822. This leaves two sockets unused, which
are not however available for another receiver
without interference on reception.
TECHNICAL APPENDIX