Kathrein UFS 822sw - Manual (Page 19)

19
Select here the satellites you want tuner 2 to
receive signals from, as you did for tuner 1.
When you have selected all the satellites you want,
press the
!
(green) button.
FIRST INSTALLATION
Press the buttons and the
button to select the satellite confi guration for each
satellite you previously selected.
LNB Type:
Press the button to open the LNB settings
menu. Press the buttons to make your
selection. To confi rm your selection press the
buttons to select “OK” and press the
button.
- Single (LNB Low frequency 9750 MHz)
- Dual (LNB Low frequency 9750 MHz and LNB
High frequency 10,600 MHz)
- Universal (LNB Low frequency 9750 MHz and
LNB High frequency 10,600 MHz and Limit
frequency 11,700 MHz)
Press the buttons and the
button to select the satellite confi guration for each
satellite you previously selected.
LNB Type:
Press the button to open the LNB settings
menu. Press the buttons to make your
selection. To confi rm your selection press the
buttons to select “OK” and press the
button.
- Single (LNB Low frequency 9750 MHz)
- Dual (LNB Low frequency 9750 MHz and LNB
High frequency 10,600 MHz)
- Universal (LNB Low frequency 9750 MHz and
LNB High frequency 10,600 MHz and Limit
frequency 11,700 MHz)