Konica Minolta 2490MF - Manual (Page 57)

Print Media 45
"
If you have problems feeding 50 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, causing feeding problems.
"
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
„
Approved for laser printing
DO NOT use transparencies that
„
Have static electricity that will cause them to stick together
„ Are specified for inkjet printers only
Glossy Media
Test all glossy media to ensure acceptable performance and to ensure that
the image does not shift.
You can print continuously with glossy media. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
DO NOT use glossy media that is
„
Mixed with any other media in the trays (as this will cause media misfeed-
ing)
„ Specified for inkjet printers only
Capacity Tray 1 Up to 50 sheets, depending on their thick-
ness
Tray 2 Not supported
Driver
Media Type Transparency
Duplexing Not supported
Capacity Tray 1 Up to 50 sheets, depending on their thick-
ness
Tray 2 Not supported
Driver
Media Type Glossy
Duplexing Not supported