Kenwood KDC-115S - Manual (Page 6)

Increasing Volume:
Volume
Switching Modes:
Each time you press the SRC (source) button, the mode
switches as follows:
Selecting standby mode:
Press the SRC button repeatedly and switch to "OFF" .
When "OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off while leaving the
power to the unit on. Use this mode when you want to have
the display illuminated but don't want to listen to anything.
The mode switches to the next mode from any mode which
cannot be used.
NOTE
▼
Tuner mode
▼
CD mode
▼
Standby mode
Switching Modes
Turning on the power:
Press the SRC (source) button.
Turn the power on before carrying out the following procedures.
Turning off the power:
Press the PWR OFF button for at least one second.
NOTE
Power
General features
— 6 —
English
PWR OFF
AME
ADJ
AUTO
SCAN RDM REP
KDC-115S
LOUD A.ADJ CRSC
1 2 3 4 5 6
SRC
BAND
CLK
ATT AUD
SRC/
PWR OFF
4/¢
ATT/
LOUD
CLK/
ADJ
AUD/
A.ADJ
u/d
#1~5
ATT indicator
LOUD indicator
KDC-115S_U.S 00.12.26 3:40 PM Page 6