Kenwood VR61 - Manual (Page 11)

10
– VR61 and VR62 VR61 and VR62 –
11
6. SPECIFICATIONS
Disclaimer
EAW Commercial continually engages in research related to product improvement, new
materials, and production methods. Design refinements are introduced into existing products
without notice as a routine expression of that philosophy. For this reason, any current EAW
Commercial product may differ in some respect from its published description, but will
always equal or exceed the original design specifications unless otherwise stated.
“EAW Commercial” is a trademark of LOUD Technologies Inc.
All other brand names mentioned are trademarks or registered trademarks of their
respective holders, and are hereby acknowledged.
Model VR61 VR62
Woofer 6” x 1 6” x 2
Woofer Loading Baffle, sealed Baffle, sealed
Tweeter 1” exit
Compression
1” exit
Compression
Tweeter Loading 60 x 90 Horn 60 x 90 Horn
Operating Range
(-10 dB)
85 Hz - 20 kHz 80 Hz - 20 kHz
Horizontal Beamwidth
- Nominal (rotatable)
90 degrees 90 degrees
Vertical Beamwidth
- Nominal (rotatable)
60 degrees 60 degrees
Axial Sensitivity
(whole space SPL)
90 dB
85 Hz to 20 kHz
92 dB
80 Hz to 20 kHz
Peak Sensitivity
(whole space SPL)
93 dB
20 Hz to 20 kHz
96 dB
20 Hz to 20 kHz
Input Impedance
- Nominal
8 ohm 8 ohm
Input Impedance
- Minimum
3.6 ohm
@ 2660 Hz
7.1 ohm
@ 225 Hz
Recommended High
Pass Filter
≥ 75 Hz,
24 dB/octave
Butterworth
≥ 70 Hz,
24 dB/octave
Butterworth
Power Handling 150 W
35 V @ 8 ohms
250 W
45 V @ 8 ohms
Calculated Maximum
SPL Average
112 dB 116 dB
Calculated Maximum
SPL Peak
118 dB 122 dB
Mounting Supplied Bracket Bracket
Height 15.50 in /393.7 mm 22.25 in/565.1 mm
Width 9.50 in/241.3 mm 9.50 in/241.3 mm
Depth 10.65 in/270.4 mm 10.65 in/270.4 mm
Dimension Tolerance ± 0.1 in/2.5 mm ± 0.1 in/2.5 mm
Weight 16 lb/7.3 kg 25 lb/11.3 kg
4.56 in
115.8 mm
20˚
L
C
TOP
D
W
H
H
DIMENSIONS APPLY
TO TOP AND BOTTOM
FRONT REAR
VR62
VR61