KTI Networks KF-16M - Manual (Page 15)

• 1X - 16X RJ-45 Connectors
MDI-X jacks for Port #1 - Port #16 respectively
• 16I RJ-45 Connector
MDI-I jack for Port #16
• Diagnostic LED indicators
The indicators provide the operating status of the hub and the
network ports. The status includes power, activity status for 10M
segment, activity status for 100M segment, collision status for
10M segment, collision status for 100M segment, 10M link status
per port, 100M link status per port, partition status per port.
• Cascade Connectors
The connectors are used for cascading more than one hub as a hub
stack. The connectors are labeled IN and OUT respectively for
KF-16M. KF-16MS provides IN cascade connector only.
• AC Power Socket
This socket is used for plugging an AC power cord.
• AC Power Switch
This switch is used for turning the AC power to the hub unit on or
off.
9