Konica Minolta Bizhub C20P - Manual (Page 80)

Configuration Menu Overview 66
"
All factory default values are shown in bold.
PAPER
SOURCE
Settings
TRAY1/TRAY2/TRAY3
Select the tray that is used for camera direct printing.
"
TRAY3 appears only if the optional lower feeder unit is
installed.
LAYOUT
Settings
1-UP /2-UP/3-UP/4-UP/6-UP/8-UP
Specify the number of images printed on a single sheet of media.
When set to 1-UP , only one image will be printed on a single
sheet of media.
PAPER
MARGIN
Settings
STANDARD /MINIMUM
Select the size of the media margins (area that is not printed in).
If STANDARD is selected, the standard media margin size is
specified.
If MINIMUM is selected, the media margins are reduced.
IMAGE
QUAL-
ITY
BRIGHT-
NESS
Settings
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be
adjusted.
CONTRAST
Settings
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the image can be adjusted.
ECONOMY
PRINT
Settings
ON/OFF
Select whether to print graphics with a reduced
density by reducing the amount of toner that is used.
If ON is selected, the amount of toner used is
reduced when printing.
If OFF is selected, the amount of toner used is not
reduced when printing.