Konica Minolta Bizhub C20P - Manual (Page 117)

Media Types 103
Thick Stock
Paper thicker than 90 g/m 2 (24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
DO NOT use thick stock that is
„ Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Use envelopes that are
„ Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
„ Approved for laser printing
Capacity Tray 1
(Manual Feed
Tray) Up to 20 thick stock sheets, depending on
their thickness.
Tray 2/3 Not supported
Orientation Face down
Driver
Media Type
Thick 1 (91-150 g/m 2 )
Thick 2 (151-210 g/m 2 )
Weight 91–210 g/m² (25–55.9 lb bond)
Duplexing Not supported
Capacity Tray 1
(Manual Feed
Tray) Up to 10 envelopes, depending on their
thickness
Tray 2/3 Not supported
Orientation Face down
Driver
Media Type
Envelope
Weight 91-163 g/m² (25-43 lb bond)
Duplexing Not supported