Konica Minolta Bizhub C20P - Manual (Page 118)

Media Types 104
„ Dry
DO NOT use envelopes that have
„ Sticky flaps
„ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
„ Transparent windows
„ Too rough of a surface
„ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
„ Been presealed
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
„ The face sheet must follow the plain paper specification.
„ The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Use label sheets that are
„ Recommended for laser printers
„ Letter or A4 size (adhesive label stock)
DO NOT use label sheets that
„ Have labels that easily peel off or have parts of the label already removed
„ Have backing sheets that have peeled away or have exposed adhesive
Capacity Tray 1
(Manual Feed
Tray) Up to 20 label sheets, depending on their
thickness
Tray 2/3 Not supported
Orientation Face down
Driver
Media Type
Label
Weight 60-163 g/m² (16-43 lb bond)
Duplexing Not supported