Konica Minolta Bizhub C20P - Manual (Page 162)

Replacing Consumables 148
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
TRANS. BELT/END OF LIFE appears. Printing can continue even after
this message appears; however, since the print quality is reduced, the trans-
fer belt unit should be replaced immediately.
1
Turn off the printer and discon-
nect the power cord and inter-
face cover.
2
Open the printer’s front cover.
3
Remove the all imaging units
and waste toner bottle.
"
For details on removing
the imaging unit or waste
toner bottle, refer to
“Replacing a Imaging
Unit” on page 135 or
“Replacing the Waste
Toner Bottle” on page
141.
"
Cover the removed imag-
ing unit to protect it from
direct sunlight.