Konica Minolta Bizhub C20P - Manual (Page 149)

Replacing Consumables 135
Replacing a Imaging Unit
When replacing a imaging unit, refer to the following table. For optimum print
quality and performance, use only approved KONICA MINOLTA imaging units
for your specific printer type, as listed in the table below. You can find your
printer type and the imaging unit part numbers on the consumables reorder
label inside the front cover your printer.
Note
Do not touch the OPC drum
surface. This could lower image
quality.
If I-UNIT LOW on the SYS DEFAULT MENU/ENABLE WARNING is set
to ON , the message I-UNIT LOW X (where “ X ”. represents the color of the
toner) appears when a imaging unit becomes near empty. Follow the steps
below to replace the imaging unit.
"
You are advised to replace the indicated imaging unit when the mes-
sage
I-UNIT LIFE X appears.
1
Check the message window to see which color imaging unit needs replac-
ing.
Printer
Type Printer Parts
Number Imaging Unit Type Imaging Unit
Parts Number
AM A00F 014
Imaging Unit - Black (K) A031 00G
Imaging Unit - Yellow (Y) A031 05G
Imaging Unit - Magenta (M) A031 0AG
Imaging Unit - Cyan (C) A031 0GG
EU A00F 024
Imaging Unit - Black (K) A031 00J
Imaging Unit - Yellow (Y) A031 05J
Imaging Unit - Magenta (M) A031 0AJ
Imaging Unit - Cyan (C) A031 0GJ
Y
PU SH