Kenwood KRF-V4530D - Manual (Page 17)

17
Operations
Normal playback
1
Listening to a source component
2
3
Start playback from the selected source.
1
2
3
4
5
6
7
8
9
Adjusting the sound
Adjusting the tone
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
1
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 8 seconds.
Use the INPUT SELECTOR to select the source you want to
listen to.
Use the VOLUME CONTROL knob (VOLUME keys) to adjust
the volume.
2
Select this to adjust the low frequency range.
(Press the
key once.)
Select this to adjust the high frequency range.
(Press the
key twice.)
Once-touch low frequency emphasis (bass boost)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
• Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality or
ambience effects adjustment mode.
Switching back to the previous setting
FM
AM
MHz
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO SOUND AUTO
LFE
C
S RS LS
TI.VOL B
CLIP MUTE
RDS EON PTY
TP TA NEWS
SW
L SP A R
STEREO
1
2
3
4
5
6
7
Selecting VIDEO 2/MONITOR (except for KRF-V7030D)
Depending on the component connected to the
jacks, select either the “
” setting or the “ ” setting, as
appropriate. 8
VOLUME
INPUT
SELECTOR
INPUT
SELECTOR
RC-R0610 RC-R0510
INPUT SELECTOR
VOLUME CONTROL
VOLUME
VOLUME
RC-R0610 RC-R0510
SOUND
VOLUME CONTROL
SOURCE DIRECT
PHONES
SPEAKERS A/B
SOUND
MUTE
B.BOOST
MULTI
CONTROL
MULTI CONTROL
KRF-V6030D/
V5030D/
V4530D
VOLUME
SOUND
MUTE
BASS BOOST
MULTI
CONTROL