Kenwood XD-A700 - Manual (Page 54)

XD-951/A900/A700 (En)
54
Preparation section
Application section
Knowledge sections
Effective Sound Adjustment
1Press the MENU key.
2Select the LISTEN MODE.
(Go to next step within 15 sec.)
3Select the DSP.
(Go to next step within 15 sec.)
4Select any of the DSP.
Set the DSP mode
| Scrolled display (SELECT MODE)
CD PGM (Displayed only when the CD input is selected)
DUBBING (Displayed only when a tape is in deck B)
SOUND
DISPLAY
TIMER
LISTEN MODE (Scrolls then stops.)
MODE
MENU
DOLBY PRO LOGIC
DOLBY 3 STEREO
STEREO
DSP
CT M O D E L E s
÷ To cancel the listening mode, press the MENU key again.
÷ When the number of displayed characters exceeds 10, the characters
are first scrolled then stop.
O 4 P s D
DISCO
HALL
LIVE
RETURN ..... Returns to
3 of 1.
O C s I D
To cancel DSP play
The DSP mode uses the digital processing capability of the DSP to create the reverberation components (factors of sound
reflections in a variety of spaces), that determine the feeling of presence, without altering the quality of the music source.
DSP (Digital Signal Processor) playback
DSP mode
The DSP mode creates the ambiance of a hall, disco or live house from any kind of program source. This mode is particularly effective
when listening to a stereo program source such as a CD, TV and FM broadcasting. Although the DSP mode can create a simulated stereo
surround effect from a monaural source, the proper effect may not be obtained depending on the played software.
SET 1 2
SET 1 2
Selected mode is displayed.
Selected mode is displayed.
STEREO
ENTER 1 2
If you are operating the main unit, press the LISTEN MODE key
then select by turning the MULTI CONTROL jog dial in place of press-
ing the “
@ #” key of the remote control unit.