Searching for the desired music program, Dpss) – Kenwood XD-A700 User Manual
Page 25
XD-951/A900/A700 (En)
25
Preparation section
Application section
Knowledge sections
Basic section
Searching for the desired music program
(DPSS)
The DPSS (Direct Program Search System) is capable of detecting non-recorded spaces of more than 4 seconds as “blanks
between programs” and, based on this information, can return to the beginning of the music program being played or the
beginning of a desired program by skipping up to 16 other programs.
The DPSS may not function normally with the following kinds of tape.
÷ Tapes containing several no-sound intervals of more than 4 seconds, such as conversation and talk tapes.
÷ Tapes containing pianissimo sections, such as classical music tape.
÷ Tapes in which large noise is recorded in blanks between programs.
÷ Tapes containing blanks between programs that are shorter than 4 seconds.
÷ Tapes recorded at low level.
÷ Tapes recorded by cross-fade recording (in which the beginning of next program is overlapped on the end of previous program).
Notes
Notes
To play the next program
: Press once.
To play the 4th program
after the current program
: Press 4 times.
During play in direction
3
To play the next program
: Press once.
To play the 4th program
after the current program
: Press 4 times.
To return to the beginning
of the current program
: Press once.
To play the 4th program
before the current program : Press 5 times.
During play in direction
2
To return to the beginning
of the current program
: Press once.
To play the 4th program
before the current program : Press 5 times.
Let's put out some sound
3
¡
2
1
7
3
¡
2
1
7