Konica Minolta DiMAGE X - Manual (Page 75)

75
On the unplug-or-eject-hardware window,
the hardware devices to be stopped will
be displayed. Highlight the device by
clicking on it then click “Stop.”
Confirm the indicator lamp is not lit and then drag the mass-storage device icon and drop it into the
trash.
Disconnect the USB cable and turn off the camera.
• If the USB cable is disconnected before performing the first step, an alert message will appear.
Always complete the first step before disconnecting the USB cable.
Macintosh
A confirmation screen will appear to indicate the devices
to be stopped. Clicking “OK” will stop the device.
The safe-to-remove-hardware screen will appear. Click
“OK.” Disconnect the USB cable and then turn off the
camera.