Konica Minolta DiMAGE X - Manual (Page 74)

Click on the small window to stop the
device. The safe-to-remove-hardware
window will appear. Close the window
and then disconnect the USB cable
and turn off the camera.
When more than one external device
are connected to the computer, repeat
the procedure above except right click on the unplug-or-eject-hardware icon. This will open the
unplug-or-eject-hardware window after clicking on the small window indicating the device.
74
D
ATA
-
TRANSFER MODE
Disconnecting the camera from a computer
Windows Me, 2000 professional, and XP
Confirm the indicator lamp is not lit.
Disconnect the USB cable and then turn
off the camera.
To disconnect the camera, left click on the unplug-or-eject-hardware icon located on
the task bar. A small window will open indicating the device to be stopped.
Windows 98 and 98SE
Never remove the USB
cable while the viewfinder
indicator lamp is lit!
The camera cannot be turned off until the
USB cable is disconnected.