Konica Minolta DiMAGE X - Manual (Page 67)

67
Connecting to Windows 98 and 98SE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert
it into the CD-ROM drive and follow the accompanying instructions on the screen.
Before connecting the camera to the
computer, place the DiMAGE software
CD-ROM in the CD-ROM drive. The
DiMAGE installer menu should
automatically activate. To automatically
install the Windows 98 USB driver, click
on the starting-up-the-USB-device-driver-
installer button. A window will appear to
confirm that the driver should be installed;
click “Yes” to continue.
When the driver has been successfully
installed, a window will appear. Click
“OK.” Restart the computer before
connecting the camera (p. 65).
Automatic Installation