KTI Networks KPOE-800-2P - Manual (Page 7)

1.4 Model Definition
KPOE-800-1P 1 Power Model The injector unit with one pre-installed power module
KPOE-800-2P 2 Power Model The injector unit with two pre-installed power modules
KPOE-800P60W Power Module PoE 60W Power Module
KPOE-800BSET1 BRACKET SET1 The bracket set for mounting one unit in a 19” rack
KPOE-800BSET2 BRACKET SET2 The bracket set for mounting two units in a 19” rack
1.5 Specifications
Network Ports 8 connections to 8 non-PoE switched ports
8 connections to 8 PoE powered devices
Compatible Std. Ethernet Ethernet, Fast Ethernet & Gigabit Ethernet
PoE Standard IEEE 802.3af compliance
Data IN Jack Shielded RJ-45
IEEE 802.3, 10Base-T, 100Base-TX, 1000Base-T std.
Hot-plug support
PoE OUT Jack Shielded RJ-45
IEEE 802.3, 10Base-T, 100Base-TX, 1000Base-T std.
Hot-plug support
PoE OUT Cable 4-pair Cat.5, 5e, or 6
Distance mid-span up to 100 meters
PoE OUT Voltage 48VDC on jack pin 4/5 (V
48dc
+) and jack pin 7/8 (V
48dc
-)
PoE OUT Power Total 60 Watts for 8 connections with one power module
Total 120 Watts for 8 connections with two power modules
PoE OUT Protection Port power shut down protection for events:
- Incompliant PD detection,
7