Sony PCV-RXP-RZP User Manual
Page 48
VAIO Digital Studio System Reference Manual
34
8
If necessary, remove any add-on cards to gain access to the battery.
You may also need to disconnect some cables.
9
Use a small flathead screwdriver or your finger to push in (not down)
against the small tab at one end of the battery holder to release the
battery.
Installing a lithium battery (PCV-RX series model)
10
Gently lift out the battery and dispose of it properly.
11
Insert the new battery into the battery holder, with the plus (+) side
up, and press down until the battery is secure.
12
Replace any add-on cards that were removed.
13
Reconnect any cables that were disconnected.
14
15
Reconnect the power cord and turn on the computer.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-on card or other sensitive electronic
component.
✍
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
Push the tab in (not down) to
release the battery