Sony UP-970AD - Manual (Page 12)

A
n
al
o
g
M
o
de
Connections
12
Analog Mode
Connections
Notes
• Turn off the power to each device before making any
connections.
• Connect the AC power cord last.
• After completing connections, switch to the analog
mode before turning on the printer.
• The printer will not print images imported via the USB
terminal.
to video output
connector
Connecting cable
(BNC
y BNC)
(not supplied)
Video equipment
Color/black and
white video monitor
to video input
connector
Connecting cable
(not supplied)
to VIDEO OUT
to
VIDEO
IN
to -
AC IN
to REMOTE
to wall outlet
RM-91 remote control unit
(not supplied)
a) Set the 75 Ω select switch as follows.
ON: When nothing is connected to the VIDEO OUT
connector, set the switch to this position.
OFF: When a video monitor or other video equipment is
connected to the VIDEO OUT connector, set the switch
to this position.
75 Ω select
switch a)
AC power
cord (not
supplied)