Siemens Gigaset C34 - Manual (Page 7)

6
Operating the phone
Gigaset C34 / ISR eng / A31008-M1607-B501-1-7619 / start_guide_time.fm / 22.3.05
Please note:
u Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and insert
them in again.
u The batteries may warm up as they are
charging. This is not dangerous.
u After a while the charge capacity of the
batteries will decrease for technical rea-
sons.
Activating/deactivating the
handset
a Press the end call key and hold
(confirmation beep).
Activating/deactivating the
keypad lock
# Press the hash key and hold.
You hear the confirmation beep. The icon
Ø appears in the display when the keypad
lock is activated.
The keypad lock deactivates automatically
when you receive a call and activates
again after the call.
Setting the date and time
§§Menu§
¢
Settings
¢
Date/Time
~ Enter the day, month and year
with 6 digits and press §OK§ . Use
q to move between the
fields.
~ Enter hours and minutes with
4 digits (e.g. Q M 1 5 for
07:15) and press §OK§ . Use q
to move between the fields.
Operating the phone
Control key
1 Display functions
2 Control key
In these instructions, the side of the con-
trol key that you must press in the given
operating situation is shown in black (top,
bottom, right, left). Example: t for "press
the top of the control key".
The control key has a number of different
functions:
When the handset is in the idle state
s Open the directory.
t Adjust the ringer melody vol-
ume of the handset (page 13).
In lists
t / s Scroll up/down line by line.
In menus
t / s Scroll up/down line by line.
In an input field
t / s Move the cursor left or right.
During an external call
s Open the directory.
t Adjust loudspeaker volume for
earpiece and handsfree mode.
Using display functions
The current display functions are shown
reverse highlighted in the bottom display
line.
u / v
Launch left / right display func-
tion.
Note:
The handset displays an advisory message if
you press a key by accident while the keypad
lock is on. To deactivate the keypad lock, press
the hash key # and hold.
§§§§INT§§§ §§Menu 1
2