Siemens Gigaset C34 - Manual (Page 10)

9
Using the directory and lists
Gigaset C34 / ISR eng / A31008-M1607-B501-1-7619 / start_guide_time.fm / 22.3.05
Handsfree talking
With handsfree talking, instead of holding
the handset to your ear you can put it
down, e.g. on the table in front of you, to
allow others to listen and speak to the
caller.
Activating/deactivating handsfree
Activating while dialling
~ d Enter the number and press
the handsfree key.
¤
You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Switching between earpiece and
handsfree mode
d Press the handsfree key.
Switch handsfree on and off during a call.
If you wish to place the handset in the
charging cradle during a call:
¤
Press the handsfree key d and hold it
while placing the handset in the base.
If handsfree key d does not light up,
press the key again.
To find out how to adjust the volume, see
page 13.
Muting
You can deactivate the microphone in
your handset during an external call.
Muting the handset
§INT§ Press the control key.
Cancelling muting
a Briefly press the end call key.
Making internal calls
Internal calls to other handsets registered
on the same base are free.
Calling a specific handset
INT Open list of internal users.
Your own handset is indicated
by < .
s c Select a handset and press the
talk key.
Or:
~
Enter the number of the hand-
set, e.g. 2.
Calling all handsets ("group call")
INT Open list of internal users.
P Press the star key. All handsets
are called.
End call
a Press the end call key.
Using the directory and lists
You can store up to 100 entries in the
directory (the actual number depends on
the size of the individual entries).
You create a personalised directory for
your own individual handset. However,
you can send the list or individual entries
to other handsets (page 10).
Directory
In the directory you store numbers and
matching names.
¤
With the handset in idle status, open
the directory by pressing s.
Length of an entry
Number: max. 32 digits
Name: max. 16 characters
Note:
You can assign a number from the directory to
a key for speed dialling (page 10).