Spectra Logic T50E - Manual (Page 8)

Replacing the Flash (SD) Card
8
Partition Settings
1. Select Configuration > Partitions. The Partitions screen appears.
2. Select Details and write down all partition information (for each partition),
including:
ƒ Name of each partition
ƒ Number of storage slots for each partition
ƒ Number of drives for each partition
ƒ Which tape drive acts as the “exporter” for the library
ƒ Which tape drives, their physical location or their designation are configured for
each partition
Network Information
1. Select Configuration > Network. The Network screen appears.
2. Write down all of the Network information.