Sharp MX-M350U - Manual (Page 4)

[SYSTEM SETTINGS] Key
The [SYSTEM SETTINGS] key on the operation panel is called the [CUSTOM SETTINGS] key in the Operation
manual (for facsimile). When configuring system settings, refer to the illustration below. At other places in the
Operation manual that refer to the "Custom Settings", substitute "System Settings".
* With respect to the administrator settings, see the following.
2. ADMINISTRATOR SETTINGS
The "Administrator Settings" in the system settings are referred to as "Key Operator Programs" in the Operation
manual (for facsimile). For explanations of the administrator settings for the fax function, see chapter 8, "KEY
OPERATOR PROGRAMS", in the Operation manual (for facsimile).
At places in the Operation manual (for facsimile) that refer to the "Key Operator Programs", substitute "Administrator
Settings".
Due to this change, steps 1 to 3 on pages 8-3 and 8-11 are as follows.
1 Press the [SYSTEM SETTINGS] key.
2 Touch the [ADMINISTRATOR SETTINGS]
key.
3 Enter the administrator password (5-digit
number) with the numeric keys.
The factory default
administrator password
is indicated on page 2 of
Administrator settings
guide.
For the steps that follow, see pages 8-3 and 8-11 of the
Operation manual (for facsimile).
Location in Operation manual
(for facsimile)
When using the MX-M350U/
M450U/M350N/M450N
Applicable function
Operation manual page
(chapter)
USING THE TRANSFER
FUNCTION Page 3-18
Changes in the fax reception
function Page 5-2
STORING, EDITING, AND
DELETING AUTO DIAL
KEYS AND PROGRAMS Page 6-2
STORING A GROUP INDEX Page 6-9
PROGRAMMING,
EDITING, AND DELETING
FCODE MEMORY BOXES Page 6-10
EDITING AND DELETING
A MEMORY BOX Page 6-14
PRINTING PROGRAMMED
INFORMATION Page 6-14
ADMINISTRATOR
SETTINGS* Chapter 8
S
SYSTEM
SETTINGS
B STATUS
SYSTEM
SETTINGS
B STATUS
SYSTEM
SETTINGS
ADMINISTRATOR SETTINGS
SENDER CONTROL
FAX DATA
RECEIVE/FORWARD
ADMINISTRATOR PASSWORD
!Dragon2_addpaper_us.fm 2 ページ ２００６年１２月５日 火曜日 午後８時４１分