Sharp MX-M350U - Manual (Page 20)

1-6
ORIGINALS
ORIGINALS THAT CAN BE FAXED
Original sizes
Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be
automatically reduced.
A document can also be faxed without reducing its size. In this case, the left and right edges will not be
transmitted. (See "Auto reduction sending setting" on page 8-7.)
Minimum original size Maximum original size
Using the automatic
document feeder
A5: 210 mm (width) x 148 mm (length)
(8-1/2" (width) x 5-1/2" (length))
A5R: 148 mm (width) x 210 mm (length)
(5-1/2" (width) x 8-1/2" (length))
297 mm (width) x 800 mm* (length)
(11" (width) x 31-1/2"* (length))
* Long documents can be loaded
Using the document glass
297 mm (width) x 431.8 mm (length)
(11" (width) x 17" (length))
NOTE
Originals that are not a standard size (A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R,
8-1/2"x14", 11"x17") can also be faxed.
Faxed document width Receiving machine's paper width Reduced size Ratio (Area ratio)
A3 (11"x17") B4 (8-1/2"x14") B4 (8-1/2"x14") 1 : 0.78 (1 : 0.64)
A3 (11"x17") A4 (8-1/2"x11") A4R (8-1/2"x11"R) 1 : 0.5 (1 : 0.5)