When selecting wireless – Sharp BD-HP35U User Manual

Page 49

Settings

SETTINGS

Select “Next”, then press

ENTER.

• If selecting “Yes” in the step 5, go to the step 8.

Enter your DNS address.

Primary
Secondary

• The primary and secondary DNS addresses are

entered using the screen for inputting characters.

(See page 49.)

Regarding each of the setup values, confirm the

specifications of your broadband router.

Select “Next”, then press

ENTER.

For testing the connection to the Internet, after

confirming the settings, press a/b to select

“Test”, then press

ENTER.

• “Test” is available only when setting to obtain the IP

address automatically. “Test” cannot be selected if

the IP address has not been obtained automatically.

Confirm the current setting.

: xxx xxx xxx xxx

xxx xxx xxx xxx

: xx xx xx xx xx xx

IP Address

Netmask

Gateway

DNS Address

MAC Address

Test

Complete

• As a result of the test, if the Internet connection

fails, enter the setup values manually.

Press a/b to select “Complete”, then press

ENTER.

Press

HOME or EXIT to return to the HOME

screen.

• To perform other settings, press j.

When selecting Wireless

CAUTION

• We recommend writing down the MAC address of

the connected wireless LAN adapter in this operation

manual (page 48) and keeping it in a safe place. The

MAC address is labeled on the adapter or displayed on

the “Current Ethernet setup info.” screen (See step 5

below).

• When performing the wireless communication setup,

security information for the wireless router/access

point (WEP, WPA or WPA2 key) is required. Check your

wireless router/access point’s information prior to setup.

NOTE

• Wireless communication setup cannot be performed

when the wireless LAN adapter is not inserted.

• Before this player can access the Internet wirelessly,

setup of a wireless router/access point is required.

Press a/b to select “Settings”, then press d or

ENTER.

Press a/b to select “Communication Setup”,

then press d or ENTER.

Press a/b to select “Ethernet Setup

(Wireless)”, then press d or ENTER.

Press a/b to select “Change”, then press

ENTER.

Current Ethernet setup info.

: xx xx xx xx xx xx

: Not Selected

: Auto Setup

MAC Address

Access Point

IP Address

Netmask

Gateway

DNS

Change

Initialize

• For initializing the current setting, select “Initialize”,

then press

ENTER.

The player scans all of the available access

points and displays the points with the “Other

Network” selection bar on the screen.

• During searching access point(s), “

Accessing...”

appears on the screen.

• Up to 6 items (5 access points and the “Other

Network” selection bar) are displayed on the screen.

• When there are six or more items retrieved, display

the next screen by selecting “Next”, then pressing

ENTER. (The “Other Network” selection bar is

always displayed last.) When no available access

points are retrieved, only the “Other Network”

selection bar is displayed on the screen.

Press a/b to select “desired access point” or

“Other Network”, then press

ENTER.

• For access points which are set to hide the SSID

using the wireless router, select “Other Network” to

set the access point.

Select the access point.

XXXXXXXXXXXX

YYYYYYYYYYYY

Other Network

• If selecting “desired access point”, go to step 9.

• If selecting “Other Network”, go to the next step.

(Continued on the next page)