Connecting to a tv/projector – Sharp BD-HP35U User Manual

Page 18

Connection

Connecting to a TV/projector

You can enjoy high quality digital picture and sound using an HDMI cable. (Only

TVs/projectors with an HDMI terminal can be connected to this player.)

When you use AQUOS LINK, make sure to use a certified HDMI cable.

Be sure to turn off this Player and the TV/projector before making any

connections.

Firmly connect an HDMI cable (commercially available) to the HDMI OUT

terminal on the player (1) and the HDMI IN terminal of the TV/projector (2).

HDMI cable

(commercially available)

Projector

NOTE

• In this player, “HDMI Video Out” is set to “Auto” as a default (See page 42). (Normally

set to “Auto”.) If you don’t get a stable image with “HDMI Video Out” set to “Auto”,

select the output resolution which corresponds to the connected equipment.

• To enjoy 3D images, connection to a 3D compatible TV is needed.

• For connection to a TV/projector, refer to the TV/projector’s operation manual.

After connecting

• If desired, connect audio equipment. (Page 17)

• If necessary, perform the Audio Video Settings. (Pages 42–43)

• Refer to AQUOS LINK function. (Pages 23 and 43)

• Prepare the desired disc or content and start playback. (Pages 25–34)