beautypg.com

Sharp BD-HP35U User Manual

Page 25

background image

23

Playback

Before Starting Playback

Using AQUOS LINK

Controlling the Blu-ray disc player

using AQUOS LINK

What is AQUOS LINK?

Using the HDMI CEC (Consumer Electronics

Control), with AQUOS LINK you can interactively

operate this player with your SHARP AQUOS TV.

What you can do with AQUOS LINK

When you connect this player to the LCD TV

compatible with AQUOS LINK using an HDMI cable,

you can perform the functions listed below. (See

page 16 for connecting to the HDMI terminal).

E

Automatic input select function

When you start playback of this player, the input

selector of the LCD TV will automatically switch to

the LCD TV input terminal connected to the player

and the playback image will appear on the screen,

even if you are watching a TV program.

E

Automatic power off function

If you turn off the LCD TV when this player is in stop

mode, the power of this player will be turned off

automatically. (However, when playing back a disc

or other content using this player, the power does

not turn off.)

E

Automatic power on function

When you switch to the LCD TV input terminal

connected to this player, the power of this player will

be turned on automatically.

E

AQUOS PURE MODE

When you connect this player to an AQUOS LCD

TV compatible with AQUOS LINK and set “AQUOS

LINK” to “Yes” (page 43), images automatically

adjusted to the most suitable image quality for the

AQUOS TV are output from the HDMI OUT terminal

of this player.

NOTE

• In order to make AQUOS LINK available, set “AQUOS

LINK” to “Yes” (See page 43).

Refer to the Operation Manual of the TV for details

regarding setup.

Using 3D

This sets output of 3D images.

To view 3D images, playback of 3D content (3D BD

video) is necessary with a 3D compatible TV and 3D

glasses in addition to this player.

Press

3D to change to the 3D mode.

• Each time the button is pressed, the mode switches

between “Auto(3D)” and “2D”.

• The status of the selected mode will be displayed on the

TV screen.

Auto: Video signals are output as 3D when 3D content (3D

BD video) is played or as 2D when 2D content is played.

2D: Even if 3D content (3D BD video) is played, video

signals are output as 2D at all times.

• This setting (Auto(3D)/2D) can also be performed using

the menu screen (See page 45).

NOTE

• The 3D mode can be switched only when playback is

stopped.

• Depending on the connected TV, the images during

playback may switch to 2D images due to changes in

the resolution, etc. Make sure the 3D image setting is

performed on the TV.

• The 3D images may not be output as set in “HDMI

Video Out”.

• When performing Fast Forward/Reverse, images are

shown in 2D.

CAUTION

• When viewing 3D images, viewing for a long period

of time or lying on your back may cause eye strain

and discomfort. In addition, 3D images may affect the

eyesight of young children/infants, so keep them from

viewing the images.