Sharp BD-HP35U User Manual

Page 21

Connection

Broadband Internet Connection

Wireless connection (wireless LAN)

Insert the wireless LAN adapter (supplied) into the W-LAN/USB1 terminal on the

rear of the player.

Wireless LAN adapter

(Supplied)

Wireless

router

Modem

Internet

When a wireless connection is made, it is necessary to enter the MAC address

shown on the wireless LAN adapter for the wireless router. We recommend writing

down the MAC address in this operation manual. (See page 48.)

NOTE

• When you insert or remove a wireless LAN adapter, be sure to turn the main power off

and make sure that “Quick Start” is set to “No” (See page 43).

• You must use a wireless router/access point that supports IEEE802.11 b/g/n. (n is

recommended for stable operation of the wireless network.)

• Wireless LAN, in its nature, may cause interference, depending on the usage conditions

(access point performance, distance, obstacles, interference by other radio devices,

etc.).

• Set the wireless router/access point to Infrastructure mode. Ad-hoc mode is not

supported.

• SHARP cannot guarantee that wireless LAN adapters other than the supplied adapter

will operate with this player.

• SHARP cannot guarantee that all brands’ wireless routers will operate with this player.

After connecting

• Perform the communication settings. (Pages 46–49)

• When enjoying BD-LIVE functions, see pages 28 and 44.

• When enjoying video on-demand services (e-Contents), see pages 55–56.

• To play back files via the Home Network, see page 34.

• To update the software via the Internet, perform Software Update Settings.

(Pages 51–52)